| Additives |
| Adhesion |
Anti-Slip |
Drying |
Fire Retardant |
Insecticide |
Mildewcide |
Smell |
Texture |
Everybody needs a
little help once in a while. Some days everything seems to work out just fine
and other days a little something extra is all one needs to get the job done.
For old folks it might be a dietary supplement that puts them right. For house
paints, there is a world of additives to help give a little extra something to
make things feel right. O-Gee has recently placed a number of new additives in
stock since getting access to Coronado's and Insl-x's paint line. These
products are used to adjust the working properties or to add a special feature
to a coating. Working properties include characteristic features such as dry
times, viscosity, and surface tolerance. Special features include texture,
mildew resistance and insect control.
Additives can change the working
properties of a coating or to add a special feature by simply stirring it into
the product. Some are simple dispersants while others may react with the
chemicals that constitute the paint film. Since all of these alter the
formulation, manufacturer defect warranties may be compromised and care must be
taken on the part of the consumer to ensure that the additive and the paint can
be used together. A paint manufacturer like Coronado that supplies additives
will have tested their products for compatibility. Other generically similar
products may work well with a particular additive, but not necessarily. Testing
is recommended prior to full scale use to determine if there are any negative
effects. Unusual aromas, increased brittleness, a change in opacity, decreased
spread rates, induced pot life, and difficult brushing are all possible side
effects from use of certain additives. Over adding may also create its own
share of problems.
A variety of additives should be a part of every
painter's tool box. Paints are made and tested in a controlled laboratory
setting but are applied in the real world where environmental conditions change
day to day. The label might say that paint X is good for both metal and wood,
however, the same paint applied on a metal door during a windy hot dry day will
seem like an entirely different product on the wood trim in a damp, cool
restaurant. The use of the appropriate additives will help even out the
differences and provide the right working properties for the working
conditions. |
| INSECTICIDE |
 |
Bug Juice can be added to any oil or latex-based paint,
stain, or sealant. This product is safe for pet areas, storage units such as
pantries, under sink cabinets and clothes closets. Use anywhere a long lasting
insect control is desired.
Insect control is desirable where spiders
enjoy setting their webs. Other insects that dwell on the faces of buildings
will also be eliminated. Bug Juice is the first ever EPA registered insecticide
paint additive designed for interior and exterior use. |
| ADD-2™ PREVENT MILDEW Mildewcide |
ADD-2 blends easily into any interior or exterior, latex or
oil-base paint, stain or wallpaper adhesive to prevent the growth of mold &
mildew on the coating film.
PRODUCT FEATURES: Proven, long-term mold and
mildew protection Blends easily into all interior or exterior, latex or
oil-based paints, stains and wallpaper adhesives EPA registered fungicide to
prevent mold & mildew on coating film
Will not affect color or
performance of paints, stains or wallpaper adhesives
|
 |
| FIRE RETARDANT for Latex Paints |
| Project Fire Safety FR-1 Flame Retardant Additive can be
mixed with any latex paint to raise its ignition temperature to provide a
"Class A" Flame Spread Rating depending on the surface and number of coats.
FR-1 will not affect the color of the paint, clear coatings may also be used.
Mix one 8 oz. jar to 1 gallon of paint. |
FR-1 TDS
& MSDS |
| ADHESION Additives for LATEX PAINT |
| Flood's Easy Mix E-B added to a latex paint will give
it some ability to penetrate into porous and chalky surfaces. This is
accomplished with emulsified alkyd resins - much like alkyd modified house
paints. Easy Mix E-B also includes wetting agents to better soak into a chalky
or porous surface. Adding thinner to paint will, of course, allow it to soak
into a surface but it may take the binder with it leaving a weakened film on
top. Adding Easy Mix E-B gives latex paint additional resins to soak in while
minimizing binder loss. |
|
 |
| ODOR
CONTROL |
$3.52 each! |
Paint SCENTsations is a paint additive
packaged in 1 ounce packets Paint SCENTsations comes in five subtle scents
(scent details below). |
When Paint SCENTsations is added to the
paint, the result is a long-lasting air freshener that eliminates odors and
refreshes rooms!
Under optimum conditions Paint SCENTsations produces a
pleasant scent and helps eliminate odors for up to 6-12 months in smaller areas
and 4-6 months in larger areas. For best results, we recommend using two coats
with Paint SCENTsations in both the primer coat and topcoat when painting. |
| ANTI-SLIP Additives |
Granular material mixed into a floor
paint can help to prevent falls and slipping accidents. O-Gee has 3 grades of
materials from fine to coarse. When applying mixed product, pour a strip on the
floor and spread with a roller. Other methods include shaking onto the wet
paint then backrolling to ensure encapsulation. For greater durability, always
apply a coat of untreated material or a clear topcoat over the skid-resistant
paint. |
 Seal Krete
Clear Grip is micronized polymeric light profile aggregate for use as an
anti-skid additive in most paint or clear coatings. It is hard, clear, and has
excellent resistance to chemicals and detergents and will give gentle texture
to your floor paints. It is effective and yet is gentle enough for walking on
with bare feet. Excellent for around pools or food preparation areas or where
often cleaning is necessary. The lightweight allows it to remain in suspension
longer than traditional skid resistant additives. It is resistant to solvents
and can be used in solvent-based alkyd, urethane and epoxy coatings. Do not use
in repellents, silicones or wax coatings.
|
|
|
 |
| DRYING Additives for LATEX PAINT |
| Titan's Paint Mate is the newest addition to our line
up of products to help with latex paints. This is a liquid to reduce waterbase
paints making them easier to atomize and improve their flow so your latex spray
jobs come out smooth and beautiful. It doesn't breakdown the paint making it
runny like water does. |
|
| Floetrol from Flood also helps rejuvenate old latex
paint and helps eliminate brush strokes in new latex paint, but its heavier
viscosity makes it less suitable for spraying than Coronado's Latex Retarder
|
|
Water base paints can also be slowed to improve their brush
out. Coronado's Latex Retarder is a thin blend of special solvents that,
unlike water, works on the emulsified droplets of paint to remain soft until
they coalescence into a paint film. A little goes a long way to slow the
drying. - Qt - $12.67 |
Benjamin Moore also has an extender for paints. Use as a
thinner and open time extender for Aura interior, Aura exterior, and Regal when
application conditions require it.
• Can be used for brushing, rolling
or spraying
• Especially useful under relatively dry, windy or hot
applications conditions |
|
DRYING Additives for ALKYD PAINT |
| Oil-base and alkyd products that get heavy or thick and dry
too fast need to be slowed down to improve their flow and leveling. Although
adding thinner might help to some extent, Penetrol from the Flood
Company gives excellent brushing properties without sacrificing viscosity.
|
|
Speeding up drying times can be just as
important, especially when downtime is an issue. Lacquers and water-base
coatings don't really need to speed up as they dry to the touch so fast anyway,
alkyds on the other hand can be a real problem. Traditionally, japan drier is
added to speed the uptake of oxygen into the paint for more rapid curing.
Lately there is another player on the scene to help oil-base paints dry
faster.
Many companies have Urethane additives to harden and enhace the
gloss of their industrial enamels. These products create a chemical reaction in
the alkyd paint causing an alkyd to dry to the touch and harden in a much
shorter period. It is important to mix only what you are going to immediately
use and do not over do these products as they can make paint harden in the can.
Also, these urethane accelerators have toxic fumes so it is best that safety
equipment is used including gloves, respirators, goggles etc and they are
applied in well ventilated areas. |
| DRYING Additives for LACQUER |
|
|
|
|
| TEXTURE Additives |
 |
| Additives used to add the special features of texture begin
with Bondex's Roll-A-Tex line of graded perlite for simulating sprayed stucco.
Any of the three different grades of fine, medium or coarse are added directly
to liquid paint to produce decorative effects or help obscure surface defects.
A high-performance formula of texture additives that emulsify and become part
of any paint. For use on drywall, plaster, cement block, poured concrete,
stucco, brick or wood. Available in Fine, Medium or Coarse particle size for
three distinct types of texture finishes. 3.85 each |
|
|
 |
 
 |
O-Gee Paint Co. 6995 Bird Road Miami, FL 33155
USA
Local 305-666-3300 ~ US Toll
Free 866-666-1935 ~ Fax 305-666-5169 |
This site maintained by :
The Web Diddler
|
