|
|||||||||
O-Gee
Paint Promote Your Page Too |
Air Assisted Airless Sprayers
| Finish Pro 395 | FinishPro 290 | Graco Turbine Sprayers | |
| Finish Pro 390 | Parts & Accessories | CapSpray Turbine Sprayers |
|
||||
| AIR ASSISTED AIRLESS SPRAYERS | |
|---|---|
| Air-assisted airless sprayers combine high production rates with high finish quality. You get near HVLP quality at near airless speed! Material is delivered to the gun at lower pressure than traditional airless (500-1500 psi vs. 1500-3000 psi) and is partially atomized through a small tip. Full atomization is achieved by adding a small amount of air (5-35 psi) to the edges of the spray fan – resulting in a softer pattern, more control, higher transfer efficiency, and less overspray. | True 2-in-1
Capabilities Allows you to spray stains, enamels, varnishes, lacquers, sealers, and other finishing materials at lower pressures in air-assisted airless mode – resulting in an exceptional finish AND allows you to spray a full range of paints, primers, and other heavier materials in AIRLESS mode |
| Premium G40 Air-Assist Gun
with RAC X™ SwitchTips™ • All new ‘optimized’ air cap utilizes 8 air passages to deliver air closer to the tip – resulting in a softer, more consistent pattern from start to finish • Lightweight, compact design is ideal for getting into tight areas • Ultra light trigger pull and form-fitted handle means less fatigue for the user • Air adjustment valve conveniently located right at the gun • Graco’s fine finish tips provide a superior spray finish • Reversible tips allow for easy clearing of clogged tips – no need to disassemble the gun • Switching tips is simple – ideal when moving from trim to doors |
 |
| Graco’s Proven
Endurance™ Piston Pump • Piston pump allows for consistent priming and pumping of even the heaviest materials – without thinning! • Long-life V-Max™ Packings, Chromex™ Rod and Stainless Steel Cylinder • QuikAccess intake valve to easily clean or clear debris • Proven design and rugged construction – long-life, durable design |
High Output On-Board Air
Compressor • Customized air compressor from an industry leader – Thomas™ • Twin-cylinder design provides high output in a compact design • Smooth, quiet operation • Delivers 3.2 cfm @ 35 psi • Exclusive Electronic Pressure Unloader results in higher performance • Cooling coil reduces air temperature – extending the life of critical components and providing safe operation |
| FINISH PRO 395 | top |
|---|---|
 |
Graco’s premier solution to fine finishing!
The FinishPro 395 offers a high-quality fine finish at a high production rate
while handling the most challenging materials. True 2-in-1 Capability • In the air-assisted airless mode the on-board air compressor assists the pump in producing a high quality fine finish at lower pressures • Able to support up to a .021 tip in airless mode MANUAL |
| Includes: G40 Gun, RAC X FFT210, LTX517, 3/16" x 50' (4.8 mm x 15 m) BlueMax II 3300 psi Hose, 3/8" x 50' (9.5 mm x 15 m) air hose |
| FINISH PRO 390 | top |
|---|---|
 |
The FinishPro 390 offers a
high-quality fine finish at a high production rate. True 2-in-1 Capability • In the air-assisted airless mode the on-board air compressor assists the pump in producing a high quality fine finish at lower pressures • Able to support up to a .020 tip in airless mode MANUAL |
| Includes: G40 Gun, One-gallon suction tube, RAC X FFT210, LTX517, 3/16" x 50' (4.8 mm x 15 m) BlueMax™ II 3300-psi Hose, 3/8" x 50' (9.5 mm x 15 m) air hose |
| FINISH PRO 290 | top |
|---|---|
 |
The FinishPro 290 Introducing the newest air-assisted airless fine finish sprayer – FinishPro 290. This sprayer is ideal for contractors who need a high quality finish at a higher production rate than HVLP. Spray light to heavy material right out of the pail! MANUAL |
| Includes: AA30 Gun, One-gallon suction tube, RAC X FFT210, LTX517, 3/16" x 25' (4.8 mm x 15 m) BlueMax™ II 3300-psi Hose, 3/8" x 25' (9.5 mm x 15 m) air hose |
