| Texture Finishes Cross-Reference Guide |
| Use the
correct sprayer below to achieve the desired finishes: |
1 - Simulated Acoustic (popcorn)
 |
2 - Orange peel, Fine spatter
 |
3 - Splatter
 |
4 - Knockdown
 |
5 - Smooth , Level 5 and Skim coat finishes
 |
6 - Textured acrylic and elastomeric
 |
7 - EIFS and Stucco Finish Coatings
|
8 - Deck Coatings
 |
|
| 1,
2, 3, 4 |
1, 2, 3, 4, 6,
7, 8 |
1, 2, 3, 4, 6,
7 |
1*, 2*, 3*,
4*, 5 |
1*, 2*, 3*,
4*, 5 |
1*, 2*, 3*,
4*, 5 |
6,
7 |
| RTX 650,
900, 1250 |
RTX 1500 |
GTX 2000 |
Mark IV |
Mark V |
5900 HD |
1030 FC |
| *Optional Air Atomizer Kit required for this application. See
here for user supplied air compressor requirements. |
| RotoFlex II Texture Sprayers |
 The Exclusive
RotoFlex Texture Pump - HIGH PERFORMANCE, LONG LIFE,
AND EXCEPTIONAL RESULTS |
COVER SMALL TO LARGE
JOBS WITH ONE COMPLETE UNIT. TexSpray RTX 900 and RTX 1250 are ideal
for interior residential refinishing, repairs, new construction, and light
commercial jobs.
- Projects texture up to 4 ft (1.2 m) for high
production rates without a ladder or stilts.
- Five times the capacity of a standard hopper gun
before refilling allowing you to spray longer and finish sooner.
- Controlled spray pattern puts more texture on the
ceilings or walls and sprays easily in tight areas.
- Delivers smooth, consistent material flow for uniform
coverage and pattern
- When combined with air, projects texture up to 4 feet,
handling a full range of light to heavy texture up to 60 psi
- Air cylinder maintains a consistent material pressure for
the life of the RotoFlex pump
- Pump hose offers long life, easy maintenance and quick
replacement
- Easily flush out the system with water. No parts to rust
or filters to clean!
|
|
RTX 650 is the perfect pumping system for tradesmen and
contractors who are ready to graduate from a hopper gun to a faster,
more-productive, less-fatiguing spray rig. |

 User-supplied air compressor with minimum performance of 3.5
cfm at 40 psi required for most applications. See technical manual for full
details, listed by application |
- Innovative Pump-Only Texture Sprayer Small,
lightweight and portable easy to bring on and off the job site
Designed for use with a user-supplied air compressor
- RotoFlex II Texture Pump Delivers smooth
material flow for uniform coverage and a consistent pattern Provides
material flow rates up to .65 gpm for faster applications
- Lightweight Spray Gun Allows material to be
kept back at the pump so youre left to manage only the weight of the gun
Ergonomically styled for comfortable spraying, regardless of project
size
- Superior Texture Projection Pumping system
force-feeds material through the texture gun and projects texture farther than
a traditional hopper gun
- Oversize Material Hopper Holds 5 gallons of
material, allowing you to complete a whole room without stopping to refill
Specially shaped opening acts as a pail rest just tip the pail
over and let it drain into the hopper .
RTX 650 - $425.00
: |
| Max Delivery |
Max working Pressure |
Max. Hose |
Motor |
|
| .65 gpm |
50 psi |
20' |
1 HP |
MANUAL |
|
|
The all new RTX 900 is the perfect choice for the small
contractor whos looking to spray high-quality texture finishes with a
simple-to-use, self-contained machine. |

 Touch-up Hopper not shown Max Delivery: .9 gpm Max working
Pressure: 60 psi Weight: 75 lbs
|
- New RotoFlex II Texture Pump* Features an
innovative braided sling that provides extra support to the RotoFlex pump tube
Delivers smooth material flow for uniform coverage and a consistent
spray pattern
- New Higher-Production Performance Points
Material flow increased by more than 20% finish jobs even faster
Material pressure boosted by more than 10% handle thicker mud
mixes
- New Higher-Capacity On-Board Air Compressor
20% greater air output projects material farther Complete
air-consuming splatter and orange peel finishes faster
- New Larger-Capacity Hopper Holds 8
gallons of material for more time spraying between refills Ultra-low
entry height of 32 in makes filling the hopper easier
- Exclusive Dual-Use Gun* Versatile,
patent-pending design converts quickly to a hopper gun for touch-up jobs
Easy-to-use air trigger adjustments on the gun New through-handle air
passage prevents material from contaminating the needle spring
- New Single-Motor Design One motor operates
the pump and air compressor, making the sprayer smaller and 15 lbs (7 kg)
lighter Delivers 1.7 hp for optimal performance
- Touch-Up Hopper Attaches to air spray gun
without tools for completing quick jobs
|
|