| Valspar is replacing both
Valspar and McCloskey branded interior wood stains and finishes with the Cabot
brand. Many of these cross over to new names and numbers but are the same color
and consistency that folks have grown comfortable using. Some favorite colors
like Light Oak are discontinued and completely sold out, others such as Pecan
and Fruitwood have swapped names and some are only available in quarts and
halfpints. Call us if you really want to get halfpints. |
| EXTERIOR FINISHES |
 |
Superior protection against weathering and salt water.
Resists cracking and peeling. Better than polyurethane - expands and contracts
with weather conditions. Excellent for boats, fences, and outdoor furniture.
Free flowing and easy brushing. $47.61 per gallon $16.72 per quart
|
| INTERIOR OIL FINISHES |
 |
Interior Wood Stain is a remarkably rich and workable
pigmented finish that penetrates deep into wood surfaces, uncovering the hidden
beauty of natural grain, character and texture. Formulated with the
finest-grade oils and pigments, the results made possible by this union will
impress even the most discerning craftsman. Colors: view available colors For
use on: most types of wood such as Oak, Pine, Fir, Birch, Aspen, Maple,
Cypress, Mahogany and Redwood. How much to buy: One gallon covers up to 400-600
sq. ft. (37-56 m2) depending upon surface porosity. Do not thin. Tungseal
stains are heavy bodied stains similar to wiping stains.
Color
Chart |
Cabot Interior Stains -
Mixed Colors
Custom Color
Chart |
| The 56 colors shown will require
tinting. Colors are likely to vary with the type, color, grain, porosity, and
texture of the wood used. A sample brush out on your wood is recommended. |
|
|
|
|
| Note: Colors shown on
pine. Color accuracy will vary based on monitor and printer calibrations.
Please visit your local Cabot dealer to view actual color samples before making
final decisions. |
|
 |
Cabot Oil Varnish
Formerly known as Heirloom
Varnish, Cabot Varnish enriches fine wood surfaces with beautiful clear finish
that protects surfaces from minor nicks, scratches, spills and stains. For
interior fine wood surfaces including doors, furniture and cabinets. For use
on: bare, stained or previously varnished or finished wood. Not recommended for
floors. Safe for children's furniture.
|
 |
CABOTHANE
GymSeal Tung Oil Varnish has been replaced
by a polyurethane. According to Tech service at McCloskey, the raw materials
are no longer available.Cabothane is an extremely durable finish that remains
flexible and withstands tough, high traffic areas like stairs and gym floors.
It is resistant to scuff marks, mars, scratches and virtually all household
chemicals. For use on: all types of wood flooring such as oak, pine, fir,
birth, aspen, maple, cypress, mahogany and redwood.
This product replaces
the venerable Gymseal, no longer available.
Do not use on plastic laminate
floors or pre-finished factory wood flooring.
|
 |
WaterBase Polyurethane
Interior Water-Borne
Polyurethane is an acrylic polyurethane that provides crystal clear protection
with the ease of fast-drying and water clean-up. For use on: most types of wood
such as Oak, Pine, Fir, Birch, Aspen, Maple, Cypress, Mahogany and Redwood. How
much to buy: One gallon covers up to 400-500 sq. ft. depending on surface
porosity. Do not thin.
Although Cabot says Mahogany and redwood, be very
careful to do a test on a good sized piece of scrap. These deep colored woods
can sometimes bleed when using a waterbase finish. If your test proves positive
for tannin extraction, use an oil based or shellac sanding sealer such as
(Zinsser's Seal Coat) as a barrier.
Interior Oil-Based Polyurethane is a
traditional polyurethane that protects wood surfaces with a hard and durable
finish. For use on: most types of wood such as Oak, Pine, Fir, Birch, Aspen,
Maple, Cypress, Mahogany and Redwood.
|
 |
CABOT BRUSHING LACQUER
Cabot Brushing Lacquer gives
exceptionally pale, clear finish to wood and metal. It is designed to dry in as
little as 30 minutes so you can apply multiple coats in one day. This lacquer
is specially formulated with the lightest color resins available. For use on:
interior wood and metal surfaces including doors, furniture, woodwork,
cabinets, shelves, brass hardware and doorknobs. Also for use on bare, stained
or previously finished wood surfaces. Do not use on outdoor surfaces, floors or
metal or wood surfaces subjected to high heat. Do not use as a sealer under
other finishes.
|
 |
Wipe-on Polyurethane is an easily applied and protective
polyurethane finish with a traditional hand-rubbed appearance. For use on:
Hard-to-finish interior wood surfaces such as chairs, railings, spindles,
furniture and wood trim.
Cabot Teak Oil Finish restores and maintains teak
wood with its premium blend of natural ingredients. Teak Oil provides a rich
oiled appearance while preventing graying and staining. This deep-penetrating
formula extends the life of teak by replacing the natural oils taken away by
exposure to the elements. This clear finish resists cracking or peeling and
accentuates the natural beauty of teak. Ideal for marine environments. Do not
apply over varnish, as it cannot penetrate the wood properly. For long-lasting
protection against sun and rain, refresh your teak periodically with another
coat of Teak Oil.
Cabot Tung Oil Finish imparts a striking hand-rubbed
beauty to both bare and stained wood surfaces. The deep-penetrating formula
revitalizes aged and refinished interior wood, restoring its natural beauty.
For use on: Use on any bare or stained interior wood surface where a natural
wood look is desired. For long-lasting protection, simply wipe-on this premium
Tung Oil Finish. Hand rub additional coats onto the surface for increased sheen
and durability. Do not apply to floors. Do not use on woods already sealed with
protective finish.
|
|
